EVOLUTION GUN WORKS Vortex Razor Sight Mount For Kimber 1911 (49435)

Description

Features of EVOLUTION GUN WORKS Vortex Razor Sight Mount 49435

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.831″
• Overall Width: 1.062″
• Mounting Hardware: (2) 8-32 Button Head Screw

Product Info for EVOLUTION GUN WORKS Vortex Razor Sight Mount 49435

EGW’s red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. The EVOLUTION GUN WORKS Vortex Razor Sight Mount For Kimber 1911 is made to fit Vortex Viper/Venom Bomar sights.

Simply remove the rear sight on your gun and replace it with EGW’s mount in order to mount your red-dot sight. No alterations are required. You can take this mount off and replace your rear sight at any time. Mounting hardware included. EGW’s products should be installed and checked by a qualified and competent gunsmith.

• Remove the rear sight
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount
  (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite to the provided mounting screws
• Torque mounting screws to 15in/lbs

GritrOutdoors is an authorized Evolution Gun Works dealer